Detect my Current Location
The new Bentley Continental GT will represent “a paradigm shift in driving performance” over its predecessor, according to engineering boss Rolf Frech.
The grand tourer, which will make its public debut at the Frankfurt motor show in September, has been created to “set a benchmark for all GTs”, said Frech, who added that he believes “this [car] redefines luxury driving again”.
Bentley hopes the new version of its most popular model — which is even expected to outsell the hugely successful Bentayga SUV — will appeal to both loyal and new customers and be “even more agile without compromising luxury”, helped by a chassis, suspension, W12 engine and dual-clutch eight-speed gearbox that are all new.
The Crewe-based car maker’s intention is to extend the Continental GT’s appeal to those buyers who might traditionally choose a Porsche for its handling qualities. The design of the third-generation Continental has taken inspiration from the EXP 10 Speed 6 concept car shown at the Geneva motor show in 2015. Frech said the style remains “clearly Bentley and Continental”. The new car is longer than the outgoing model, with the front wheels 135mm further forward, which in turn has allowed the bonnet to be extended and the nose to be lowered. The wheelbase has increased by 110mm to 2856mm. The model is 25mm wider than the current car. It is 1954mm wide, 1392mm tall and 4805mm long.
The shorter front overhang also means improved weight distribution. With two adults on board and light luggage — which Bentley deems “typical grand touring occupancy” — it has changed from 56:44, front to rear, to 53:47. The new Continental’s unladen weight distribution is 55:45 compared with 58:42 previously.
While the front retains the muscular look of the second-generation model, the rear design is more refined. This has been achieved by so-called ‘superforming’, a precision technique that heats aluminium panels to 500deg C, allowing more defined lines to be created. The Continental is the first production car to have an entire body side made via the superforming process, Bentley claims.
The Continental’s body sits on an aluminium structure. Eschewing the previous generation’s Volkswagen Phaeton-based platform, the model uses the Porsche- developed MSB (modular standard drivetrain) platform that is also in the new Panamera. However, the Bentley is keen to point out that its parts are “82% unique”, despite the collaboration with Porsche.
The car uses an “intelligent mix of body-in-white materials to improve torsional stiffness while reducing weight”, saving 85kg on the previous body, said Bentley chief engineer Bob Teale. The kerb weight for the W12-powered launch model is down from 2320kg to 2250kg.
The model follows in the Bentayga’s footsteps by having Bentley Dynamic Ride, a 48-volt electric active roll control system that improves ride and handling and makes the car “feel much lighter and more precise”, according to Teale.
There are four driving modes: Sport, Comfort, Bentley and Custom. The Bentley setting is what the company’s engineers think is the optimum set-up and blends characteristics of Sport and Comfort.
Double wishbones are used up front, with a multi-link axle at the rear. The model is the first Bentley to introduce a new three-chamber air-spring system. It contains 60% more air volume than the previous single-chamber springs and can switch chambers in and out of use, giving a chassis set-up for all types of driving.
There is also a new active all-wheel-drive system, which varies the front-to-rear torque split depending on the driving situation. The car’s default is rear-wheel drive for optimum efficiency and dynamic performance but, based on the conditions and driver’s behaviour, the system will send torque to the front axle if it senses extra traction is needed.
The new Continental also introduces a torque-vectoring-by-brake system to the standard car for the first time. The system was first fitted to the Continental GT3-R and Supersports models, and is said to reduce understeer.
The model also gets electric power steering — which allows for a range of driver assistance features such as active lane assist, park assist and traffic park assist — and brakes that have grown by 15mm to 420mm.
Under the bonnet is a heavily revised version of Bentley’s 6.0-litre twin-turbocharged W12 petrol engine, which the brand describes as “the most advanced 12-cylinder engine in the world”. It is mated for the first time to a dual-clutch eight-speed transmission. It delivers 617hp at 6000rpm, 43hp more than the outgoing unit, and 900Nm from 1350rpm to 4500rpm. The W12 Continental GT achieves 0-100kph in 3.7sec, 0.8sec quicker than the previous W12, with a top speed of 333kph, a rise of 14.4kph.
The Continental will be launched with the W12 engine only and Bentley won’t discuss any other powertrains for now. However, there will be a twin-turbo 4.0-litre V8. Rather than the existing Audi-engineered 3992cc unit used in other Bentleys, it will adopt a newer 3996cc engine launched in the Panamera Turbo. The V8 is expected to be offered in rear and four-wheel-drive guises.
There will also be a petrol-electric variant, using the same system as the Panamera 4 E-Hybrid. The latter has an overall system output of 450hp and 700Nm. The Continental GT Hybrid is expected to offer 31 miles of electric-only driving range.
Despite the introduction of a diesel Bentayga, it is unlikely that the Continental will adopt a diesel engine.
The cabin features high-quality leather and veneers and hand-finished chrome details. There are 12-way adjustable seats with smooth centre panels on the seats (as opposed to diamond-embossed leather found on the bolsters) for the most effective cooling, heating and massage functions.
Laminated acoustic glass has been used for the windscreen and side windows for a quieter cabin, resulting in a 9dB reduction, said Bentley.
The biggest innovation inside is the rotating display. At first glance, the central dashboard is a veneer finish. When the engine is switched on, the veneer rotates to reveal Bentley’s largest touchscreen yet, a 12.3in display, which has been designed to be “akin to a modern mobile phone”. A third side of the rotating display features three analogue dials: outside temperature, a compass and a chronometer. Drivers can choose which side of the display they prefer.
The driver’s instrument panel is fully digital for the first time and a head-up display is an option. There are also a number of USB ports in the car and Apple CarPlay integration, but Android Auto is not supported.
Two technology option packs are offered at launch: City Specification and Touring Specification. City includes hands-free boot opening, pedestrian warning, traffic sign recognition and city braking systems as well as a top-view camera. Touring gets adaptive cruise control with traffic jam assist, active lane assist, a head-up display, night vision with an infrared camera and pre-sense braking.
The Continental has 21in wheels as standard and two 22in lightweight forged alloy wheel options, one of which is part of Mulliner specification from Bentley’s personalisation division. There are 17 exterior paint colours available, eight veneers and 15 leather colours.
The new Continental will go into production later this year, with first deliveries due in spring 2018. The price is expected to rise slightly over the existing starting price for a Continental W12.
The next Continental model is likely to be the convertible GTC. Product line director Benno Brandlhuber said there is “no reason” why the new Continental line-up will not eventually echo the current range available, including the Supersports model.
Comments
Member Login
Personal Details
No comments yet. Be the first to comment.