The Hennessey F5 Venom has officially been revealed, with which the carmaker aims to break the road car speed record, thanks to a maximum in excess of 500kph (311 mph).
- It will use a 6.6-litre, twin-turbo V8 engine producing 1842hp
- Power will be sent to the rear wheels via a 7-speed single clutch gearbox
- Production will be limited only to 24 units
Hennessey will limit the production of the F5 Venom hypercar only to 24 units. John Hennessey has stated that he has taken deposits for half of those already.
Hennessey F5 Venom background
First previewed with a styling model in 2018, the carbonfibre-bodied F5 Venom is differentiated from 2011’s ultra-low-volume Venom GT by utilising an in-house platform instead of a heavily modified Lotus chassis.
Hennessey F5 Venom engine and gearbox
The F5 Venom will use a 6.6-litre, overhead-valve, twin-turbocharged V8 engine which will churn out a maximum of 1842hp (at 8000rpm) and peak torque of 1617Nm. Hennessey claims that this output in combination with the 1360kg dry weight will help make it one of the fastest road-legal cars in the world – possibly even the fastest. The company also predicts a 2.6sec 0-100kph time, a 4.7sec 0-200kph time and an 8.4sec 0-300kph time.
Power is sent to the F5 Venom’s rear wheels via a CIMA 7-speed single-clutch automated transmission and a limited-slip differential.
Hennessey F5 Venom design
The obvious differences between the production car and the concept are mostly aerodynamic, with the loss of the raised wing and the use of a substantially larger diffuser. Unusually for this class, there are no active aero elements. Production director, David Davis says the aim has been to create enough downforce for high-speed stability without creating excessive drag.
Beyond that, the car looks very similar to the concept, with butterfly doors and decent passenger space for a hypercar, with the well-finished combination of leather facings and carbonfibre trim. There are some other impressive details, including the fact that the entire rear section of the car is made from one piece of carbonfibre with CNC-machined vent holes.
Hennessey F5 Venom platform
Named after the highest rating on the Fujita hurricane strength scale, the F5 Venom uses a carbonfibre monocoque, built by KS Composites in the UK, that weighs just 86kg naked. A rear tubular aluminium subframe contains the twin-turbo V8 engine.
Hennessey F5 Venom mechanicals
Despite its enormous performance, the F5 Venom has been designed to stay drivable at lesser speeds and to cope with roads and tracks as well as it does v-max runs.
The double-wishbone suspension uses passive dampers, but these can be adjusted for bump and rebound, and the car also offers five selectable driving modes, including Drag for acceleration and F5 for ultimate speed.
Hennessey F5 Venom targets
John Hennessey is adamant that the F5 Venom will be “considerably faster” than the old Venom GT, which recorded a 270.49mph (435.31kph) two-way average at the Kennedy Space Center in 2014. His plan is to prove its performance with what he hopes will be a recognised production car speed record. The issue, he admits, is the limited space available on the Nasa runway.
He said, “From end to end, from the grass to the swamp, it’s 3.4 miles (5.5km). The GT was still accelerating when it had to brake. I reckon with the F5, in ideal conditions, we will be approaching the 300mph (483 kph) range there, but I don’t know if we have enough room to beat Bugatti’s numbers [304.77mph/ 490.47kph] down there. I think if we’re going to try for absolute v-max, we’re going to have to do it on a road somewhere.”
Also see:
SSC Tuatara sets new production car top speed record of 508.73kph
Cars that have breached the 250mph mark
The fastest production car by decade